AISI 4140 Alloy Steel Guide: Properties, Heat Treatment & Forging Applications
When loads rule out mild steel, machine builders specify AISI 4140 — the chromium-molybdenum (Cr-Mo) alloy that quenches and tempers into genuine engineering strength while staying machinable. This 2026 guide explains what 4140 is, how it behaves under heat treatment, which international grades it corresponds to, and where it earns its cost in forged shafts, gears and high-stress parts.
What Is AISI 4140 Steel?
AISI 4140 (UNS G41400) is a medium-carbon, low-alloy chromium-molybdenum steel — the workhorse grade of the 41xx family. Chromium raises hardenability and wear resistance; molybdenum suppresses temper embrittlement and holds strength at elevated temperature. Together they let a section of 100 mm or more harden through to uniform tempered martensite, which is why 4140 dominates open-die forging shops.
Buyers know it by many names: 42CrMo4 / 1.7225 in Europe, SCM440 in Japan, and 42CrMo in China. These are close equivalents, not identical certifications — always confirm the exact standard on your drawing before substituting a grade.
Chemical Composition (wt. %)
Typical heat analysis under ASTM A29/A29M and SAE J404:
| C | Mn | Si | Cr | Mo | P (max) | S (max) |
|---|---|---|---|---|---|---|
| 0.38–0.43 | 0.75–1.00 | 0.15–0.35 | 0.80–1.10 | 0.15–0.25 | 0.035 | 0.040 |
Balance iron. Actual composition and acceptance limits follow the specification edition and material certificate agreed for your order.
Equivalent Grades Across Standards
| System | Grade | Reference |
|---|---|---|
| USA | AISI 4140 / UNS G41400 | ASTM A29 / A29M |
| Europe | 42CrMo4 (1.7225) | EN 10083-3 |
| Japan | SCM440 | JIS G4105 |
| China | 42CrMo | GB/T 3077 |
Heat Treatment: the Q&T Envelope
4140 is sold in three common conditions. Annealed (~197–241 HB) is soft and easy to machine. Normalized has a refined, uniform grain structure. Quenched & tempered (+QT) is the usual delivery state for finished forgings — oil quench from about 845–850 °C, then temper at 540–680 °C to hit the hardness band on your drawing.
- Typical Q&T: 28–34 HRC, tensile strength ≥ 1,020 MPa (adjustable roughly 22–42 HRC by tempering temperature).
- Surface hardened: induction hardening or nitriding after Q&T raises wear-face hardness to 55+ HRC while the core stays tough.
The key point for buyers: one grade covers a wide strength range — the level is set by tempering temperature, so specify the hardness band and section size, not just the grade name.
Why Forge 4140 Instead of Machining from Bar?
Forging aligns the grain flow with the part geometry and closes internal porosity. Compared with cut bar, a forged 4140 shaft or gear blank delivers better fatigue life, impact toughness and directional strength — critical for components under cyclic loading. That is why spindles, high-torque shafts and drill collars are forged rather than machined from stock.
At HUABO we run forging, heat treatment and CNC finishing in-house: billet verification by spectrometer, controlled heating, open/closed-die forming, controlled cooling, quench & temper, precision machining to ISO 2768-mK, and 100% ultrasonic inspection. Explore our precision stepped shafts, forged gear rings and high-strength forgings made in grades including 4140/42CrMo.
Typical Applications
- Shafts & spindles — pump, gearbox and machine-tool drive shafts
- Gears, pinions & sprockets — Q&T plus surface hardening on wear faces
- High-tensile bolts & studs — B7-class duty and heavy-duty fasteners
- Heavy equipment — load pins, couplings, crane components and hydraulic cylinder parts
Frequently Asked Questions
What is AISI 4140 steel equivalent to?
4140 corresponds to EN 42CrMo4 (1.7225) in Europe, JIS SCM440 in Japan and GB 42CrMo in China. They are close functional equivalents, but substitution should be confirmed against the drawing's exact standard and certificate requirements.
Is 4140 stronger than 4340?
4340 carries higher nickel, giving greater toughness and hardenability in large sections. 4140 is the more economical general-purpose Cr-Mo grade and is specified far more often for shafts, gears and forgings where 4340's extra alloy content is not required.
What hardness can 4140 reach after heat treatment?
In the quenched and tempered condition 4140 is typically supplied at 28–34 HRC, and can be tempered anywhere in roughly the 22–42 HRC range. Induction or nitriding can raise surface hardness above 55 HRC while retaining a tough core.
Can HUABO produce custom 4140 forgings from our drawings?
Yes. We manufacture open-die and closed-die forgings to customer drawings and material specifications, with in-house heat treatment, CNC machining, ultrasonic inspection and EN 10204 material certificates on request.
Looking for a reliable custom machinery parts factory in China? Contact HUABO Machinery with your drawings and material requirements — as a source factory in Ningbo, we deliver factory-direct pricing, engineering support and OEM/ODM manufacturing.
